Product Description; Specifications; Safety Instructions Before Use - ATD Tools ATD-7437A Owner's Manual

Save these instructions
For safet , read, understand, and follow the information provided with and on this
this equipment should have an understanding of this
owner and operator should
Instructions and
authorized. Ma e certain that the operator thoroughl understands the inherent dangers associated with the use and
misuse of the product. If
Inspect before each use. Do not use if
damaged in wa , or operates
suspected to have
discontinue use until
annual inspection done

PRODUCT DESCRIPTION

ATDTools Transmission
and light transmissions, transfer cases and
garage pit. This

SPECIFICATIONS

Model
ATD-7437A
CAUTION! caref
SAFETY INSTRUCTIONS
BEFORE USE
1. Inspect each use. Do not use if
n or components are noted.
that casters move freel .
loose s.
. Verif that the product and the application are
compat .
3. oil filler
confirm oil level is at or
as seen from the reservoir, fill as needed and
reinstall oil filler
aware that use and repair of this product
information should
t as to the safe and proper use of this
should
to a shoc load
has
qualified personnel.
are designed to
Minimum
fore product
for and tighten an
prior to initial use to
the inner
ew.
and safe operating procedures
in the operator's native language
or damaged parts are noted.
removed from service immediatel . If the
load dropped suddenl ,
authorized service center. It is recommended that an
and operator's manuals are
used as an aid in the removal and installation of automotive
are intended for use under an overhead lift or in a
.
Area
!
Stud , understand, and follow all printed materials
provided with on this product
Do not rated capacit .
on hard, level surfaces
rated loads.
of this
and transportation of transmissions, transfer cases
and
or support a vehicle.
the center
r
For safet , do not
saddle
support the vehicle
chains and slings provided.
If loaded must
is secured, st
This is a lifting and lowering device onl .
Transfer load
device for service or repair.
loads
cause the to tip or flip over violentl ,
No alterations shall
Failure to heed these
and or propert damage.
The owner and operator of
attempting to use. The
require special
use of this
remove from service immediatel .
upon
from manufacturer.
WARNING
fore use.
is limited to the removal, installation
Do not use a transmission
of load is centered on the saddle.
tilt angle of the
in all directions.
fore starting repairs.
moved, sure that the load
and in lowest position.
to appropriate support
cause the sudden loss of load
made on this product
result in personal
and
is
that appears
has or
of supporting
to tilt
or
or .