Bug-O Systems MDS Series Instructions And Parts Manual page 2

SAFETY
PROTECT YOURSELF AND OTHERS FROM SERIOUS INJURY OR DEATH.
KEEP CHILDREN AWAY. BE SURE THAT ALL INSTALLATION, OPERATION,
MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY
ELECTRIC SHOCK can kill.
1) The equipment is not waterproof. Using
the unit in a wet environment may result
in serious injury. Do not touch equipment
when wet or standing in a wet location.
2) The unused connectors have power
on them. Always keep the unused
connectors covered with the supplied
protective panels. Operation of the
machine without the protective panels
may result in injury.
3) Never open the equipment without first
unplugging the power cord or serious
injury may result.
4) Verify the customer-supplied power
connections are made in accordance
with all applicable local and national
electrical safety codes. If none exist, use
International Electric Code (IEC) 950.
5) Never remove or bypass the equipment
power cord ground. Verify the equipment
is grounded in accordance with all
applicable local and national electrical
safety codes. If none exist, use
International Electric Code (IEC) 950.
READ INSTRUCTIONS.
Read the instruction manual
before installing and using the
equipment.
2
QUALIFIED INDIVIDUALS.
1) Do not plug in the power cord without first
2) Always verity both the pinion and wheels
3) Do not leave the equipment unattended.
4) Remove from the worksite and store in
Faulty or careless user installation is
possible. As a result, never stand or
walk underneath equipment.
1) Never try to stop the pinion from moving
2) Do not remove any protective panels,
EQUIPMENT DAMAGE
POSSIBLE.
verifying the equipment is OFF and the
cord input voltage is the same as required
by the machine or serious damage may
result.
are fully engaged before applying power
or equipment damage may occur.
a safe location when not in use.
FALLING EQUIPMENT
can cause serious
personal injury and
equipment damage.
MOVING PARTS can
cause serious injury.
except by removing power or by using the
STOP control.
covers or guards and operate equipment.