Bestcare PL350CT Configure For First Use
Hide thumbs Also See for PL350CT:

Advertisement

Quick Links

Configure Your PL350CT for First Use

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PL350CT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bestcare PL350CT

  • Page 1 Configure Your PL350CT for First Use...
  • Page 2 Step 1: Remove folded lift from box. Step 2: Secure the stand to the mast. Hold the nut on its side with two fingers. Align the nut and the hole on the stand bracket with the lower hole on the mast. Make sure the tab on the stand bracket sit in the top hole on the mast, and insert the screw to the nut as follows.
  • Page 3 Step 5: Insert the pin to secure the mast. Step 6: Remove the pin that is securing the boom. Step 7: Remove lower actuator pin on the mast.
  • Page 4 Step 8: Move the boom out of the way, and install the lower end of the actuator to the mast using a pin and retaining ring as follows. Step 9: Install the upper end of actuator to the boom by reinsert the quick release pin to secure it.

Table of Contents