Technical Specifications - D-Link DAP-3712 User Manual

Appendix A - Technical Specifications
Standards
802.11a/n/ac
Device Interfaces
1 x 100/1000 Mbps Ethernet port, reset button
LEDs
Signal strength
Antenna Type
Dish
Antenna Gain
23 dBi
Beamwidth
H: 10°, V: 10°
Standards
802.11a/n/ac
Protection
8 kV ESD Protection
Enclosure
ABS, IP66 compliant
Operation Modes
AP, Station, WDS AP, WDS Station
Range will vary depending on country's maximum transmit power output regulation. Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications.
1
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead,
lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
D-Link DAP-3712 User Manual

Technical Specifications

Operating Frequency
5180~5320 MHz, 5745~5825 MHz
Max. Transmit Power¹
27 dBm
Wireless Speed
Up to 867 Mbps
Bandwidth Support
20/40/80 MHz
Wireless Configuration
Auto channel support, transmit power selection,
SSID broadcast enabling/disabling
Security
802.11i 128-bit AES Personal / Enterprise
System Tools
Ping, traceroute, NTP, ping watchdog, syslog,
spectrum analyzer, throughput testing (lperf )
Smart Wireless Technology
TDMA, Auto ACK, intelligent rate control,
co-channel interference avoidance
Advanced Features
Max. station limit
49