D-Link DAP-3712 User Manual page 36

Section 3 - Configuration
LED LED1, LED2, and LED3 light up to indicate the
Configuration: DAP-3712's signal strength. The default ranges are:
LED1: -95 dBm to -71 dBm
LED2: -71 dBm to -56 dBm
LED3: -56 dBm and above
When the signal strength is within LED1's range,
only LED1 will light up. When it is within LED2's
range, both LED1 and LED2 will light up. When the
signal strength is above -56 dBm, all three LEDs
will light up.
Temperature
To extend the working life of your equipment, you
Setting:
can enable the overheating protection function.
To do this, enter the Advanced Configuration
Temperature Configuration page. This page
shows the performance degradation rate of
the device at different temperatures. When the
temperature is between -100°C and 110°C, the rate
will not change. When the temperature is between
100°C and 120°C, the rate will drop by 50%. At a
temperature between 110°C and 135°C, the rate
will drop by 90%, and when the temperature is
between 125°C and 150°C, the rate of decline will
be 100%.
D-Link DAP-3712 User Manual 36