Mounting The Device; Mounting On A Pole - D-Link DAP-3712 User Manual

20 km long range 802.11ac wireless bridge
Hide thumbs Also See for DAP-3712:
Table of Contents

Advertisement

Section 2 - Installation

Mounting the Device

If you plan to install the DAP-3712 on a pole, orient the front of the device (the dish and antenna) toward the intended coverage
area.
The antenna only transmits data in the direction it is pointed. Be sure to install the device at a height that ensures that the
alignment between the devices is visible and there are no obstructions in the middle.
Note: The DAP-3712 is designed to receive PoE power from an 802.3at-compliant source. Connecting the DAP-3712 to a PoE device that is not
approved by D-Link can damage the equipment.

Mounting on a Pole

1. Hold the DAP-3712 against the pole in the desired
position.
2. Thread the metal mounting tie through the hole on the
base of the DAP-3712 and wrap it around the pole. Fasten
the tie to secure the device against the pole.
D-Link DAP-3712 User Manual
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents