habitat et jardin Mariejo Manual page 14

Step Five:
Adjust the Handlebar (20) to a suitable position and then fix it on the Handlebar Post (34) with Bolt
(17) Handle Chuck Cover (18), Bushing (19), Flat Washer (14)
Step Six:
Insert the Connecting wire (24) to the hole of the Computer (22), and then install the Computer (22)
onto the computer bracket on the top of the Handlebar post, secured it with the Cross-pan head
screw (23). Finally insert the Pulse sensor wire (25) into the hole (with PULSE INPUT) of Computer
(22) as picture shown.