NOTE:
Most of the listed assembly hardware has been packaged separately, but some hardware items have
been preinstalled in the identified assembly parts. In these instances, simply remove and reinstall the
hardware as assembly is required.
Please reference the individual assembly steps and make note of all preinstalled hardware.
ASSEMBLY INSTRUCTION
Step One:
Fix the Front Bottom Tube (2) and Rear Bottom Tube (3) onto the Main Frame (1) with Carriage Bolt
(4), Arc Washer (5), Spring Washer (6) and Acorn Nut (7) as shown.
Step Two:
Attach the Left/Right Pedal (39L/R) to the Crank (8).
Always make sure the Pedals are securely tightened before any exercise.
Note: The left pedal (39L) should be tighten in the counterclockwise direction, the right pedal (39R)
should be tighten in the clockwise direction.