Cablematic USB 3.0 DISPLAY ADAPTER User Manual page 6

USB 3.0 D
ISPLAY
※When the Windows OS is Windows XP or there is no network connection
 Insert the Driver/Manual CD into CD-ROM drive; the setup program should be
launched automatically. Or, double click "D:\Setup.exe (where D: is the path of
your CD-ROM drive) and follow the instructions to install the device driver.
 After system reboot, please plug in the USB DISPLAY ADAPTER to the USB port
of your computer (host PC), the device driver will be configured automatically.
 After the driver is configured completely, the extended display will be shown on the
attached display device (monitor/projector) and an icon
Utility" appears in the taskbar. It is ready to use now.
Windows XP user: Please reboot the computer to make sure the USB Display
Adapters work correctly.
※Multi-Display Setup
 Connect the display device (monitor/projector) to the VGA/DVI/HDMI connector
of USB DISPLAY ADAPTER and turn on the display device.
 Please plug in the additional USB DISPLAY ADAPTER (connected with the
display device already) to an available USB port of your computer (host PC), the
device driver will be configured automatically. After the driver is configured
completely, the USB extended display will be shown on the attached display device.
 Repeat this step for each additional USB DISPLAY ADAPTERS you want to
install.
Windows XP user: Please reboot the computer to make sure the multiple USB
Display Adapters work correctly.
※The screen may flash or go black during installation. It is part of the normal process.
"USB Display (Trigger) Utility" icon won't be appeared if the USB
※This
DISPLAY ADAPTER does not connect to the USB port of computer (host PC).
A
DAPTER
"USB Display (Trigger)
6
U M
SER ANUAL