Advertisement
F2-T01-N13-10125-01
[Caution] Pay attention to the following points when to install the Laser scanner unit.
- Be sure to hook the rail on the Laser scanner unit to the rail [a] on the host machine [b] to install.
- Be sure that the flat cable [c] on the side of the Laser scanner unit is not disconnected.
- The photo [A] below indicates the condition that has a gap [b] because the protrusion [a] beneath the laser scanner
unit [A] is not properly fit into the hole. Fit the protrusion [a] completely as shown in the photo [B] so that no gap
is left such as [c], and then install the laser scanner unit.
(7/11)
Advertisement
