F2-T01-N13-10125-01
of this issue is the soiling on the polygon mirrors.
12) Fit the 9 cover fastening claws into their positions on the laser scanner unit and attach the 2 screws.
[Caution]
- Be careful not to soil the dustproof glass while attaching.
- Put the flat cable [1] through the guides [a].
13) Reassemble the parts in reverse order from the step 6).
14) Go to Service Mode > Mode List > COPIER > Test > PG >PG-PICK and select the paper source of "A4" or
"LTR" paper.
15) Go to Service Mode > Mode List > COPIER > Test > PG > PG-TYPE, enter "16" and press "OK" key and then
"Start" button. Check the image and if the light image is not generated, then go to the step 19). Otherwise, if light
images or white streaks are generated, then go to the step 16).
(10/11)