Lincoln R 82206 Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Lincoln Manuals
  4. Cables and connectors
  5. R 82206
  6. Owner's/operator's manual

Lincoln R 82206 Owner's/Operator's Manual

Bare reel
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

THIS HOSE REEL ROLLER OUTLET REQUIRES 3-5/8" BALL STOPS, MODELS 85515, 85516 AND 85517.
DO NOT USE MODELS 83515, 83517 AND B3517 (3" O.D.) BALL STOPS WITH THIS OUTLET.
DESCRIPTION
Model 82206 unit is a heavy duty lubreel designed for bus and
truck lubrication, or wherever extra heavy duty
construction and longer length delivery hose is required. The
reel can be installed as a single unit or in multiple
configurations.
Reel features include a reel latch that automatically locks at
desired positions as the hose is extended and releases with a
short pull on the hose.
OWNER/OPERATOR RESPONSIBILITY
It is the owner/operator's responsibility to properly use and
maintain this equipment.
SEPT - 2006
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
OWNER/OPERATOR MANUAL
Maximum working pressure
Material Inlet
Material outlet
Sheave width
Sheave diameter
Drum diameter
Overall width
Overall height
Overall depth
Maximum hose capacities (including hang down):
1/4" I.D. Air/waler hose (SAE 100 R6)
1/4" I.D. Grease hose (SAE 100 R2)
3/8" ID. Air/water hose (SAE 100 R6)
3/8" I.D. Grease hose (SAE 100 R2)
1/2" ID. Air/water hose (SAE 100 R6)
1/2" ID. Oil hose (SAE 100 R3)
1/2" I.D. Grease hose (SAE 100 R2)
5/8" I.D. Oil hose (SAE 100 R1)
NOTE: Maximim hose capacilies are based on SAE specified hoses.
Exceeding these capacities voids warranty. Refer to DELIV-
ERY HOSE INSTALLATION for proper hose to reel assembly.
IMPORTANT
The instructions and warnings contained in this manual shall
be read and understood by the owner/operator prior to op-
erating this equipment.
If an owner/operator does not understand English, the con-
tents of this manual shall be explained in the owner/operator's
native language to assure the owner/operator comprehends.
It is the owner/operator's responsibility to maintain the legibility
of all warning and instruction labels.
The owner/operator shall retain this manual for future
reference to important warnings, operating and
maintenance instructions.
Form 402140
MODEL 82206
BARE REEL
SERIES "R"
SPECIFICATIONS
5000 psi.
1/2" NPT (Female)
1/2" NPT (Female)
5-1/2"
19-1/4"
12-3/4"
8-1/4"
22-1/2"
21"
50 ft.
50 ft.
50 ft.
50 ft.
50 ft.
50 ft.
50 ft.
50 ft.
- E35
Section
- 17AA
Page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R 82206 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lincoln R 82206

Summary of Contents for Lincoln R 82206

  • Page 1 MODEL 82206 BARE REEL SERIES “R” OWNER/OPERATOR MANUAL SPECIFICATIONS Maximum working pressure 5000 psi. Material Inlet 1/2” NPT (Female) Material outlet 1/2” NPT (Female) Sheave width 5-1/2” Sheave diameter 19-1/4” Drum diameter 12-3/4” Overall width 8-1/4” Overall height 22-1/2” Overall depth 21”...
  • Page 2 FAILURE TO HEED THE FOLLOWING WARNINGS INCLUDING MISUSE, OVER PRESSURIZING, MODIFYING PARTS, USING INCOMPATIBLE CHEMICALS AND FLUIDS, OR USING WORN OR DAMAGED PARTS, MAY RESULT IN EQUIP- MENT DAMAGE AND/OR SERIOUS PERSONAL INJURY, FIRE, EXPLOSION, OR PROPERTY DAMAGE. · Do not exceed the stated maximum working pressure of the reel or of the lowest rated component in your system. ·...

  • Page 3: Installation

    FIGURE DELIVERY FIGURE CONNECTING INSTALLATION IMPORTANT INSTRUCTIONS DELIVERY HOSE INSTALLATION Perform the following instructions as (MAXIMUM SPRING TENSION) stated to correctly set the power spring for maximum tension. For smoother operation during retraction and to increase hose life, “detalc” hose by wiping entire hose length with a light lubri- Allow reel to retract two full revolutions and latch reel.
  • Page 4 ADJUSTING SPRING TENSION To prevent premature power spring failure, spring tension should be adusted so that it requires at least two full turns of the reel sheave before the spring is wound tight. Should less spring tension be desired, pull hose out from roller outlet to provide slack and latch reel.

  • Page 5: Safety Information

    Repair is limited to replacement of listed service parts. Special procedures and tools are required. Contact Linocln Customer C. Open the dispensing valve into an appropriate Service, One Lincoln Way, St. Louis, MO 63120-1578, (314) container until the pressure is relieved. 679-4200 for your nearest authorized service center.
  • Page 6 SECTION A-A Page Number - 6 Form 402140 To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com...
  • Page 7 Page Number - 7 Form 402140 To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com...
  • Page 8 LIMITED TO, THE WARRANTY OF MERCHANTIBILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. In no event shall Lincoln be liable for incidental or consequential damages. Lincoln’s liability for any claim for loss or damages arising out of the sale, resale or use of any Lincoln equipment shall in no event exceed the purchase price. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, therefore the above limitation or exclusion may not apply to you.
  • Page 9 Reparatur- und Wartungsarbeiten nur von Fachleuten unter personnel using only original spare parts. Contact you nearest Lincoln dealer or you may call Lincoln Technical Service. Anwendung von Original-Ersatzteilen ausgeführt werden. Wenden Sie sich bei technischen Fragen oder beim Bedarf von Ersatzteilen an den nächstgelegenen autorisierten Fach-...

Table of Contents