Gree GWH09ACC-K6DNA1A/I Original Instructions Manual page 33

Tools for installation
1 Level meter
4 Drill head
7 Open-end wrench
10 Vacuum pump
Note:
Selection of installation location
Basic requirement
Installing the unit in the following places maycause malfunction. If it is unavoidable,
please consult the local dealer:
1. The place with strong heat sources,
volatile objects spread in the air.
2. The place with high-frequency devices (such as welding machine, medical
equipment).
3. The place near coast area.
4. The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. The appliance shall nost be installed in the laundry.
8. It's not allowed to be installed on the unstable or motive base structure
(such as truck) or in the corrosive environment (such as chemical factory).
Indoor unit
1. There should be no obstruction near air inlet .
2. Select a location where the condensation water can be dispersed easily and
won't affect other people.
3. Select a location which is convenient to connect the outdoor unit and near the
power socket.
4. Select a location which is out of reach for children.
5. The location should be able to withstand the weight of indoor unit and won't
increase noise and vibration.
6. The appliance must be installed 2.5m a
7. Don't install the indoor unit right above the electric appliance.
2 Screw driver
r
8 Pipe cutter
11 Pressure meter
14 Measuring tape
r.
2
3 Impact drill
6 Torque wrench
9 Leakage detector
12 Universal meter
, or