The Use Of Relative Value Mode; Operation Of Hold Mode - Jeulin UT60A Manual

Measurement and instrumentation
Multimeter model UT60A
Réf :
291 033
ENGLISH
Hz% Hz%
REL Any rotary switch
position except
Hz %
HOLD (H) Any rotary switch
position

1.3 The Use of Relative Value Mode

The REL mode applies to ail measurement functions except in frequency/duty
cycle measurement; it subtracts a stored value from the present value and
displays the relative value as the result.
The definition is as follows: Relative value = present value - stored value
For instance, if the stored value is 20.0V and the present value is 22.0V, the
reading would be 2.0V. If a new measurement value is equal to the stored
value then display 0.0V.
To enter or exit REL mode:
•
Use rotary switch to select the measurement function before selecting
REL. If measurement functions change manually alter REL is
selected, the multimeter exits the REL mode.
•
Press REL to enter REL mode, autoranging turns off except under
capacitance testing mode, and the present measurement range is
locked and display the last measurement value as "0" as the stored
value.
•
Press REL again or turn the rotary switch to reset the stored value and
exit REL Mode.
Pressing HOLD in REL mode makes the Multimeter stop updating. Pressing
HOLD again to resume updating.

1.4 Operation of Hold Mode

Warning:
To avoid possibility of electric shock, do not use Hold mode to determine
if circuits are without power. The Hold mode will not capture unstable or
noisy readings.
The Hold mode is applicable to ail measurement functions.
•
Press HOLD to enter Hold mode; the multimeter beeps.
•
Press HOLD again or turn the rotary switch to exit Hold mode; the
Multimeter beeps.
19
1. Press Hz % to star the frequency counter;
the multimeter beeps.
2. Press Hz % again to enter duty cycle mode;
the multimeter beeps.
3. Press Hz % again to return to the frequency
counter mode; the multimeter beeps.
Press REL to enter and exit the REL mode in
any measuring mode except in frequency/duty
cycle mode; the multimeter beeps.
Press HOLD to enter and exit the Hold mode in
any mode, the multimeter beeps.