Functional Buttons - Jeulin UT60A Manual

Measurement and instrumentation
Multimeter model UT60A
Réf :
291 033
ENGLISH
µA AC or DC current measurement range from 400.0µA to
Hz 4000µA
mA AC or DC current measurement range from 40.00mA to
Hz 400.0mA.
Hz AC or DC current measurement range from 4.000A to
A 10.00A.

1.2 Functional Buttons

Below table indicated for information about the functional button operations.
Button Measuring
Function
POWER
Hz
V
(BLUE)
Ω
µA
Hz
mA
Hz
A
Hz
RANGE Any rotary switch
position except
at Hz % and
mode.
18
Operation Performed
Turn the power on and off.
Switches between AC and DC voltage; the
multimeter beeps. DC is default.
Switches between continuity and diode and
Resistance measurements; the Multimeter
beeps. Resistance is default.
Switches between AC and DC current range
from 400.0A to 4000A; the Multimeter beeps.
DC is default.
Switches between AC m.-and DC current
range from 40.00mA to 400.0mA; the
Multimeter beeps. DC is default.
Switches between AC and DC current range
from 4.000A to 10.00A; the Multimeter beeps.
DC is default.
1. Press RANGE to enter the manual ranging
mode; the Multimeter beeps.
Manually selecting a range causes the
Multimeter to exit the Hold and REL modes.
2. Press RANGE to step through the ranges
available for the selected function; the
Multimeter beeps.
3. Press and hold RANGE for around 2
seconds to return to autoranging; the
Multimeter beeps.