Table of Contents
Advertisement
1 Overview
3. 1. 3
Basic command buttons
The basic command buttons are used to execute basic commands that control the unit and tool.
Button name
Receive
WB RAM → TOOL
Send
TOOL → WB RAM
Save
WB RAM → WB ROM
Load
WB ROM → WB RAM
Clear Edit data
Reset
Initialize
3. 1. 4
Console
This area displays the console screen.
Use this screen when to enter commands yourself or to check detailed communication information.
You can use the console in a separate screen by double-clicking the title bar.
2 Operational Check
Loads the current values of the WB2F into the tool.
Applies setting values edited in the tool to the WB2F.
Saves the WB2F current values to the setting values area (non-volatile memory).
Loads the setting values in the WB2F setting values area (non-volatile memory) and sets
them as the current values.
Discards the setting values loaded into the tool.
Resets the WB2F.
Initializes the WB2F.
3-2
Screen and Menu
Description
4 Appendix
Screen Configuration
Advertisement
Table of Contents
