Beyerdynamic Quinta Update Instructions
Hide thumbs
Also See for Quinta:
- Operating instructions manual (46 pages) ,
- Quick start manual (28 pages) ,
- Quick start manual (18 pages)
Related Manuals for Beyerdynamic Quinta
Summary of Contents for Beyerdynamic Quinta
- Page 1 UPDATE INSTRUCTIONS 07/2018 Quinta PC Software: V. 3.1.01 Control Unit: V. 3.0.0 Microphone Units: V. 3.0.00/.01...
- Page 2 User settings and data will not be changed or deleted by this update. However, we recommend saving your current Quinta settings before proceeding with the update (see next paragraph). If you don’t intend to update the Quinta PC software on your computer, please skip the following paragraph “Saving Your Quinta User Settings”.
- Page 3 **alternatively install the new Quinta version into a different new directory in order to keep the old Quinta version as well as the new version. In this case, save the configuration (Quinta User Settings) within the...
- Page 4 Click on the black menu button in the Quinta software (top left corner) and select “System Info” from the menu. The left half of the system info window shows all Quinta CU version numbers. The right half lists all regis- tered microphone units and their versions.
- Page 5 Quinta Update Instructions 07/2018 CU Core (your current version) 3.0.0 no update necessary 2.1.00 chapter 5: Control Unit Core Update 2.0.0, 1.2.01, 1.2.00 chapter 6: Control Unit Core Update Interposed 1.1.01 chapter 7: Control Unit Core Update LEGACY CU PnP (your current version) 1.36 or 1.38...
- Page 6 Update PC Software Install New Quinta PC Software Note: Please keep in mind to save your Quinta configuration and your Quinta voting reports before updat- ing the PC-software. Refer to chapter 1 (section: “Saving Your Quinta User Settings” and “Saving Your Quinta Voting Reports”.
- Page 7 Quinta Update Instructions 07/2018 k) Click on „Settings“ and select your connection type between your computer and the Quinta CU. Click on „Connect“. m) The ribbon bar will now show the complete set of buttons. Note: If your previous Quinta PC-Software version was 1.1.0 or 1.1.2, the new PC-Software will show the correct...
- Page 8 After the update, the Quinta CU will reboot automatically and the connection to the PC software will be disconnected. e) As soon as Quinta CU display shows the standard screen again, click on “Connect” in the PC soft- ware.
- Page 9 After the update, the Quinta CU will reboot automatically and the connection to the PC software will be disconnected. e) As soon as Quinta CU display shows the standard screen again, click on “Connect” in the PC soft- ware.
- Page 10 After the update, the Quinta CU will reboot automatically and the connection to the PC software will be disconnected. e) As soon as Quinta CU display shows the standard screen again, click on “Connect” in the PC soft- ware.
- Page 11 This will additionally install the Microphone Mode application. Please proceed with the Quinta system update by checking the version number of your next component. chapter 2: Determine Your Update Procedure, section CU...
- Page 12 Use an Ethernet cable to connect the Quinta CU to your network router or to your computer. b) The factory default for DHCP is active (the router automatically assigns an IP to the Quinta CU). If necessary, you can adapt the Quinta CU network settings according to your local network: ...
- Page 13 DSP_Conifg.hex. It is not necessary to click on “Start update”, since this update will be executed immediately. The Quinta CU will reboot automatically and the connection to the PC software will be disconnected. Please reconnect the software. Please proceed with the Quinta system update by checking the version number of your next component.
- Page 14 MU_config_MicMode.hex. It is not necessary to click on “Start update”, since this update will be executed immediately. The Quinta MU will power off after a few seconds which indicates a successful file transmission. Please proceed with the Quinta system update by checking the version number of your next component.
- Page 15 The affected devices will stay in boot loader mode and will not power off automatically. Please repeat the MU update in this incident and put them closer to the Quinta CU antennas. Please re- fer to the appendix for more information about the MU signalling code. It might help to use a fixed frequency for the duration of an MU update.
- Page 16 All MU 2x microphone units will be updated simultaneously by wireless connection. Ensure that no other MUs are located within the RF range of the Quinta CU antennas (for example next door), otherwise those MUs will also participate in the update and/or may contribute to unwanted interrup- tions during the update process.
- Page 17 The affected devices will stay in boot loader mode and will not power off automatically. Please repeat the MU update in this incident and put them closer to the Quinta CU antennas. Please re- fer to the appendix for more information about the MU signalling code. It might help to use a fixed frequency for the duration of an MU update.
- Page 18 All MU 3x microphone units will be updated simultaneously by wireless connection. En- sure that no other MUs are located within the RF range of the Quinta CU antennas (for example next door), otherwise those MUs will also participate in the update and/or may contribute to unwanted interrup- tions during the update process.
- Page 19 The affected devices will stay in boot loader mode and will not power off automatically. Please repeat the MU update in this incident and put them closer to the Quinta CU antennas. Please re- fer to the appendix for more information about the MU signalling code. It might help to use a fixed frequency for the duration of an MU update.
- Page 20 All TH microphone units (MUs) will be updated simultaneously by wireless connection. En- sure that no other MUs are located within the RF range of the Quinta CU antennas (for example next door), otherwise those MUs will also participate in the update and/or may contribute to unwanted interrup- tions during the update process.
- Page 21 The affected devices will stay in boot loader mode and will not power off automatically. Please repeat the MU update in this incident and put them closer to the Quinta CU antennas. Please re- fer to the appendix for more information about the MU signalling code. It might help to use a fixed frequency for the duration of an MU update.
- Page 22 All TB microphone units (MUs) will be updated simultaneously by wireless connection. En- sure that no other MUs are located within the RF range of the Quinta CU antennas (for example next door), otherwise those MUs will also participate in the update and/or may contribute to unwanted interrup- tions during the update process.
- Page 23 The affected devices will stay in boot loader mode and will not power off automatically. Please repeat the MU update in this incident and put them closer to the Quinta CU antennas. Please re- fer to the appendix for more information about the MU signalling code. It might help to use a fixed frequency for the duration of an MU update.
- Page 24 Quinta Update Instructions 07/2018 Appendix Observe the signalling code of the Quinta MU 21/21v/22/23/23v, MU 31/33, TH or TB microphone units to determine the firmware mode and link status. Wireless link (reception) to the Quinta Control Unit ok Normal operation mode Microphone button permanently white time (sec.)
- Page 25 GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn - Germany Tel. +49 (0) 7131 / 617 - 0 | Fax +49 (0) 7131 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.com Weitere Vertriebspartner weltweit finden Sie unter www.beyerdynamic.com Abbildungen nicht vertragsbindend. Änderungen vorbehalten.