Assembly Procedures - Huawei Mediapad S7-PRO Maintenance Manual

8 Assembly Procedures

1. Ensure that the ESD wrist strap is
properly grounded.
3. Remove the protective film on the LCD.
5. Tighten the screws marked in the picture
to secure the LCD.
2012-07-20
S7-PRO Maintenance Manual (Basic Version V2.1)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Remove the protective film on the lens.
4. Install the LCD.
6. Place FPCs at the positions marked in the
picture.
INTERNAL
Page 33 of 97