7 Disassembly Procedures
1. Ensure that the ESD wrist strap is
properly grounded.
3. Remove the lower decorative cover
with the sucker.
2012-07-20
S7-PRO Maintenance Manual (Basic Version V2.1)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Name: electric screwdriver
Purpose: fasten and remove screws.
Name: small sucker (diameter: about 25 mm)
Purpose: remove the upper decorative cover.
2. Disassembly procedures are as shown
below.
4. Remove the upper decorative cover with
the sucker.
INTERNAL
Page 28 of 97