S7-PRO Maintenance Manual (Basic Version V2.1)
INTERNAL
Step3
NOTE
If the Q/QCP-XXX (Download) port is not found in the Select Port window, right-click the
icon in the taskbar on the lower right corner to display the QPST Configuration window. In the
displayed window, click Ports, and click Add New Port. In the Add New Port window displayed,
select corresponding USB/QC Diagnostic port. Double-click the selected port to add it to Port on the
right. Then click OK.
2012-07-20
Huawei Proprietary and Confidential
Page 21 of 97
Copyright © Huawei Technologies Co., Ltd.