System Board; Removing The System Board - Dell Latitude 3120 Service Manual

Steps
1. Align and place the dummy battery cell into the computer chassis.
2. Affix the adhesive tapes to secure the dummy battery cell to the system board.
3. Replace the two screws (M2x3) to secure the dummy battery cell in place.
4. Connect the battery cable to the connector on the system board.
Next steps
1. Install the palmrest and keyboard
2. Follow the procedure in

System board

Removing the system board

Prerequisites
1. Follow the procedure in
2. Remove the palmrest and keyboard
3. For systems that are shipped with a Solid State Drive (SSD), remove the
4. Remove the heatsink
5. For systems shipped with a world-facing camera, remove the
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
assembly.
after working inside your
before working inside your
assembly.
assembly.
computer.
computer.
solid-state
world-facing
drive.
camera.
Removing and installing components 41