Steps
1. Insert the world-facing camera module into the slot on the computer chassis.
2. Replace the single screw (M2.5x2.5) to secure the front-facing camera module to the computer chassis.
3. Connect the world-facing camera cable to the connector on the camera module.
Next steps
1. Install the
palmrest and keyboard
2. Follow the procedure in
Heatsink assembly
Removing the heatsink assembly
Prerequisites
1. Follow the procedure in
2. Remove the
palmrest and keyboard
About this task
The following images indicate the location of the heatsink assembly and provide a visual representation of the removal
procedure.
assembly.
after working inside your
before working inside your
assembly.
computer.
computer.
Removing and installing components
37