Display Hinges; Removing The Display Hinge - Dell Latitude 3120 Service Manual

Steps
1. Align and affix the display cable on the display cover.
2. Route the display cable through the routing channel on the bottom-left side of the display cover.
3. Affix the tape from the left hinge to secure the display cable.
4. Connect the display cable to the front-facing camera module.
5. Affix the tape to secure the display connector on the front-facing camera module.
Next steps
1. Install the display panel.
2. Install the display bezel.
3. Install the display assembly.
4. Install the palmrest and keyboard
5. Follow the procedure in

Display hinges

Removing the display hinge

Prerequisites
1. Follow the procedure in
2. Remove the palmrest and keyboard
60 Removing and installing components
assembly.
after working inside your
before working inside your
assembly.
computer.
computer.