Chengdu Ebyte Electronic Technology Co.,Ltd.
6.3 BER(Bit Error Rate) is high
There is co-frequency signal interference nearby, stay away from the interference source or modify the frequency
and channel to avoid interference;
The clock waveform on SPI is not standard, check whether there is interference on the SPI line, and the SPI bus line
should not be too long;
Unsatisfactory power supply may also cause garbled codes. Ensure the reliability of the power supply;
Poor or too long extension cords and feeders will also cause high bit error rates.
Chapter7. Soldering guidance
This product is a direct plug-in module. When welding the module, the welder must work in accordance with the norms
for discharging static electricity. This product is an electrostatic sensitive product. If the module is not welded according
to the rules, the module may be permanently damaged.
Chapter8. Related models
Model
IC
E01-ML01S
nRF24L01+
E01-ML01D
nRF24L01+
E01-ML01IPX
nRF24L01+
E01-2G4M13S
nRF24L01+
E01-ML01SP2
nRF24L01+
E01-ML01SP4
nRF24L01+
E01-ML01DP4
nRF24L01+
E01-ML01DP5
nRF24L01+
E01-2G4M27D
nRF24L01+
All wireless modules of the E01 series can communicate with each other
Chapter9. Antenna Guide
9.1 Antenna recommendation
Antennas are an important role in the communication process, and often inferior antennas will have a great impact on the
communication system. Therefore, our company recommends some antennas as supporting our company's wireless
modules with excellent performance and reasonable prices.
Copyright ©2012–2020,Chengdu Ebyte Electronic Technology Co., Ltd
Frequency
Power
Hz
dBm
2.4G
0
2.4G
0
2.4G
0
2.4G
13
2.4G
20
2.4G
20
2.4G
20
2.4G
20
2.4G
27
E01C-ML01DP5 User Manual
Distance
Pakage
m
100
SMD
100
DPI
200
SMD
1200
SMD
1800
SMD
2000
SMD
1800
DPI
2500
DPI
5000
DPI
Antenna
PCB
PCB
IPEX
PCB
PCB/IPEX
IPEX
PCB
SMA-K
SMA-K
9