Silvercrest SBL TW3 A1 Operation And Safety Notes page 29

attempt to connect to the playback device
(e .g . smartphone or computer) .
˜ Establishing a Bluetooth
connection:
Remove all plugs from the AUX-in jack 1
before you attempt to establish a Bluetooth®
connection .
Switch on the playback device and make
sures its Bluetooth
On the product press and hold the
6 for 2 seconds until the LED 5 flashes
white and a signal tone sequence sounds .
The product will now attempt to connect to
the playback device (e .g . smartphone or
computer) .
The product identification on the playback
device will be „SBL TW3 A1" . On the
playback device „ACCEPT" the connection .
mode is on .
®
®
button
US-EN 29