Road Lights - Operation - Case IH FARMALL 35A Operator's Manual

Road lights - Operation

The road lights (1) rear red taillights (2) and rear/side haz-
ard lights (3) are turned on and off using the multifunc-
tion light switch located on the left-hand side of the dash
panel. The key switch must be in the "ON" position for
these lights to operate.
To operate the road lights, taillights and hazard lights, ro-
tate the multifunction switch (4) until the "LOW Beam" and
"HAZARD" symbols (5) are aligned with the index mark (6)
on the switch lever. The instrument panel, taillights, road
lights and hazard lights will illuminate.
NOTE: For your protection, use the hazard warning lights,
road lights and SMV (slow moving vehicle) sign when trav-
eling on public roads, day or night.
5 - TRANSPORT OPERATIONS
5-3
1
NHIL13CT01336AA
2
NHIL12CT00671AA
3
93099370