EPIC
®
200 SERIES ONE-MAN HOLE DIGGER
FORM GOM08042001EU, VERSION 1.0
7.
Store Hole Digger with operator handle level with ground to minimize
potential for crankcase oil entering combustion chamber and creating
hydraulic lock up.
8.
DO NOT allow handle to come in contact with augers, shovels, or other
sharp and abrasive objects during storage to prevent damage.
9.
Store Hole Digger inside. If Hole Digger must be stored outside, protect it
and each auger with a suitable covering.
12 END OF LIFECYCLE
If the machine comes to the end of its lifecycle, destruction of the machine must
be conducted according to international and local environmental regulations.
13 DECLARATION OF CONFORMITY
We, General Equipment Company, 620 Alexander Drive SW, P.O. Box 334,
Owatonna, MN 55060, USA declare under our sole responsibility that the
portable hole digger product: 242H
To which this declaration relates is in conformity with the following standards or
standardization documents:
-
EN-ISO 12100:2010
According to the provisions of the European directive:
-
2006/42/EC
Manufactured at: Owatonna, Minnesota 55060, USA
Beginning with serial number: 174809
Signature: Dennis Von Ruden
Position: President
Date: September 14, 2020
English-EN
12