Gira HomeServer 3 Commissioning Manual page 20

HomeServer 3 - Commissioning
You can access the user interface of the HomeServer via an internet browser as follows:
1. Connect the HomeServer via its network connection either with the local network or
directly with the commissioning PC (see "Connecting to a network" on page 12).
2. Connect the HomeServer to the power supply (see "Connecting to the power supply"
on page 11).
3. Switch the HomeServer on if required.
4. Start your internet browser on your commissioning PC or an a PC connected to a
local network.
5. Enter http://192.168.0.11/hs in the address line of your browser. The numerals in the
address represent an IP address of the HomeServer. The login screen appears in the
browser window.
6. Enter one of the preset users (e.g. u1) as well as the corresponding password (e.g.
u1) in the login screen. In Refresh, select HTML (dynamic).
7. Click on Login. The HomeServers user interface opens.
i
Note: Preset IP address.
The number combination that you enter in the address line is the IP address of the Home-
Server. If you have changed the IP address assigned by the sample project in the Home-
Server then you must enter the changed address at this location.
You can now view all areas of the sample project that are accessible to the selected used
(e.g. u1).
Fig. 2.3: Navigation menu of the user interface
You can switch between menu view (1) und the visualization (2) via the navigation menu.
18
10.2006/V 1.0