Advertisement
The Duplex screen offers the ability to generate and receive at the same
time. Additionally, the Generate and Receive frequencies may be set to
any frequency within the limitation of either the Receiver or the
Generator. The Receiver could be set to 10.7 MHz or 455 kHz while the
Generator is set to 151.625 MHz allowing signal tracing through IF
strips. This feature allows the spectrum analyzer to be used for signal
tracing while the RF Signal generator is being used to stimulate the
Receiver at the channel frequency.
commonly used to test cross-band repeaters. The generator could be
used in the VHF band while the receiver is operating in the UHF band.
The
DUPLEX
control of primary features of the
RF Generator and the Receiver.
The more comprehensive stand-
alone
Receive
screens
can
be
positioning the cursor to
respective field and pressing the
F1 key to ZOOM. Zooming in on
the
RECEIVE
access to the Spectrum Analyzer
in
the
Receive
leaving the generator operational.
Rev. 1.0
screen
allows
or
Generate
selected
by
the
function
allows
screen
while
Page 34
The Duplex screen is also
Advertisement
