Advertisement
The SINAD meter can be expanded to allow more control by positioning
the cursor to the SINAD meter label [TAB] [1] [6] [ENTER] and pressing
the F1 key "ZOOM"
TAB
1
6
ENTER
ZOOM
Scope source can be set to view Internal
Modulation source, Audio/Data Input port
or Notch Residual to evaluate receiver
performance.
Rev. 1.0
"
Ensure the C-MSG Filter is enabled
"
Enable SINAD
measurements or turn Averaging OFF
for Automatic measurements.
"
Move Cursor to RF LEVEL (TAB, 2,
ENTER)
"
Select
SINAD =
SINAD point, (12 or 20 dB typical)
"
Activate Auto SINAD
"
STAND BACK AND WATCH
Note: Averaging should be turned
off when performing automatic
SINAD search operations.
Page 32
Average
to 10 for manual
and set the desired
S = On/OFF
Advertisement
