6. Install the six 'M2.5*5' screws on the keyboard to secure it to the computer.
7. Follow the procedure in
WWAN card
Removing the WWAN card
1. Follow the procedure in
2. Remove the:
a.
Batteries
b.
Bottom chassis cover
3. Remove the single 'M2*3' screw [1], remove the metal bracket [2] on the WWAN card.
4. Disconnect the antennae cables [3] and remove the WWAN card [4] out of the M.2 slot on the system board.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
93