Siemens 7PG2113 Manual page 15

Instrument
Mean
Power P 3P Demand
Max
Min
Mean
Power Q 3P Demand
Max
Min
Mean
Power S 3P Demand
Max
Min
Mean
BINARY INPUT METERS
→to view
BI 1-6 ---- ----
BINARY OUTPUT METERS
→to view
BO 1-8 ---- ----
VIRTUAL METERS
→to view
V 1-8 ---- ----
COMMNICATIONS METERS
→to view
Com1
Com2
COM1 TRAFFIC
COM1 Tx1
COM1 Rx Error
COM1 Rx
©2010 Siemens Protection Devices Limited
0.00V
0.00W
0.00W
0.00W
0.00VAr
0.00VAr
0.00VAr
0.00VA
0.00VA
0.00VA
This is the sub-group that includes all the meters that
are associated with the Binary inputs TEST/RESET
allows access to this sub-group
Displays the state of DC binary inputs 1 to 6 (The
number of binary inputs may vary depending on
model)
This is the sub-group that includes all the meters that
are associated with the Binary Outputs TEST/RESET
allows access to this sub-group
Displays the state of DC binary Outputs 1 to 8. (The
number of binary outputs may vary depending on
model)
This is the sub-group that shows the state of the
virtual status inputs in the relay
Displays the state of Virtual Outputs 1 to 8 (The
number of virtual inputs will vary depending on
model)
Displays when the communication port is active
7PG2113/4/5/6 Solkor Settings
Description
Chapter 2 Page 15 of 21