Supervisory Console/Standard Busy Lamp Field - Nortel M1250 Manual

Supervisory console/
Standard Busy Lamp Field
If your console is in supervisory
mode, the screen shows which
consoles are active and which
console is the supervisory
console. If programmed, your
console will go into supervisory
mode when you put the console
into Position Busy.
Three 'blocks' of information are
displayed on the screen. The first
block shows an S on its side. The
second block displays the number
of the supervisory attendant
(number one). The third block
displays the numbers of the other
consoles in the system which are
able to receive calls.
14
SUPERVISORY MODE
ATTENDANT STATUS
0 1 2 3 4 5 6 7 8 9
0
1
2
3
4
5
6
7
8
9
= busy or unavailable console
= active or available console
0 1 2 3 4