Safety - Whirlpool WML55011HW Service Manual

COMPONENT TESTING (Cont.)
DANGER
Electrical Shock Hazard
Only authorized technicians should perform
diagnostic voltage measurements.
After performing voltage measurements,
disconnect power before servicing.
Failure to follow these instructions can result in
death or electrical shock.
When performing live voltage measurements, you must do the following:
Verify the controls are in the off position so that the appliance does not start when energized.
I
Allow enough space to perform the voltage measurements without obstructions.
I
Keep other people a safe distance away from the appliance to prevent potential injury.
I
Always use the proper testing equipment.
I
After voltage measurements, always disconnect power before servicing.
I
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation.
Verify proper operation after servicing.
3-2 n Low Profile Microwave Hood Combination
For Service Technician Use Only

Safety

Voltage Measurement Safety Information
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.