Disassembly Instructions; General Requirements - Nokia RH-37 Series Disassembly Instructions Manual
Transceivers
Hide thumbs
Also See for RH-37 Series:
- Service software and tuning instructions (72 pages) ,
- Manual (70 pages) ,
- Rf troubleshooting instructions (52 pages)
Advertisement
Nokia Customer Care
Disassembly Instructions
General requirements
Use the correct ESD protection before handling the RH-37 product.
Use gloves to handle the RH-37 product.
Required tools:
• torx 6 screwdriver, for disassembly
• torx 6 torque-driver, set to 28Ncm torque for reassembly
• slotted screwdriver
• tweezers
• SS-42 camera removal tool
• SRT-6 opening tool
• DC-plug
Note: When shielding lids are removed from the shielding frames of the PWB, new lids must be used
in order to close the shielding properly. It is not allowed to re-use the removed ones.
Issue 1 07/04
Nokia Corporation
5 - Disassembly Instructions
RH-37
Page 5
Advertisement
