Lan - Local Area Network - Billion BiPAC 8500 User Manual

LAN - Local Area Network

A Local Area Network (LAN) is a shared communication system to which many computers are
attached together and is limited to the immediate area, usually within the same building or storey of
a building.
These are the items within the LAN section:
Filter, Port Setting
Bridge Interface
You can setup member ports for each VLAN group under Bridge Interface section. For example
shown as above, 2 VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in
this order.
Bridge Interface
Ethernet
Ethernet1
Ethernet2
Ethernet3
Edit Ethernet Interface Parameter
Click on a specific Ethernet you that you wish to edit its interface parameter under the Bridged
Interface section.
You can also edit the Ethernet Interface parameter such as its Acceptable Frame Type; Filter Type
or PVID for Untagged Frames. When the editing is complete, click Apply to save the changes and
then click Return to go back to the Bridged Interface page.
and DHCP Server.
P1 / P2 / P3 / P4
P2 / P3 / P4
P3 / P4
P4
Bridge Interface, Ethernet,
VLAN Port (Always starts with)
50
IP Alias, Ethernet Client