CCS Technical Documentation
included in Mjoelner) is controlled via the serial data contained in three control lines, a
chip select, a clock line and a serial data line.
RF characteristics
Channel numbers and frequencies
System
Channel number
E-GSM
0 <= n <= 124
975 <= n <= 1023
GSM1800
512 <= n <= 885
Main RF characteristics
Item
Receive frequency range
Transmit frequency range
Duplex spacing
Channel spacing
Number of RF channels
Power class
Number of power levels
Transmitter characteristics
Item
Type
LO frequency range
Output power
Gain control range
Maximum phase error (RMS/peak)
Output power requirements, EGSM
Parameter
Max. output power
Issue 1 11/02
Table 38:
Channel no. relative frequencies
TX frequency
F = 890 + 0.2 * n
F = 890 + 0.2 * (n –1024)
F = 1710.2 + 0.2 * (n-512)
Table 39:
Main RF characteristics
E-GSM values
925...960 MHz
880...915 MHz
45 MHz
200 kHz
174
4 (2 W peak)
15
Table 40:
Transmitter main characteristic
E-GSM values
Direct conversion, nonlinear, FDMA/TDMA
3520...3660 MHz
2 W peak
Min. 30 dB
Max 5 deg RMS / max 20 deg. Peak
Table 41:
Output power requirements, E-GSM
Output Power requirements - E-GSM
Min
ãNokia Corporation
RX frequency
F = 935 + 0.2 * n
F = 935 + 0.2 * (n –1024)
F = 1805.2 + 0.2 * (n-512)
GSM1800 values
1805...1880 MHz
1710...1785 MHz
95 MHz
374
1 (1 W peak)
16
GSM1800 values
3420...3570 MHz
1 W peak
Typ
Max
33.0
RH-9
System Module & UI
Unit
MHz
MHz
Unit / Notes
dBm
Page 83