CCS Technical Documentation
Needed actions if ASIC is changed
UEM changed
If UEM is changed baseband calibrations should be made. IMEI has to be rebuilt to the
phone.
AEM changed
If AEM is changed proximity and ambient light sensor calibrations should be achieved.
UPP_WD2 changed
Device has to be reflashed.
Flash0 changed
IMEI has to be reprogrammed. Has to be flashed (naturally). IMEI has to be rebuilt to the
phone.
RF component changed
If any RF component changed, RF calibration(tuning) has to be done.
Issue 1 07/02
¤Nokia Corporation
NHL-2NA
Page 55