Instrument and control functions
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 6-36.)
TIP
When the coolant temperature is
3
below 40 °C, "Lo" will be dis-
played.
The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
1
1. Air temperature display
This display shows the air temperature
from –9 °C to 99 °C in 1 °C increments.
The temperature displayed may vary
from the ambient temperature.
TIP
When the temperature is below –9 °C,
"Lo" will be displayed.
Brightness control mode
1
1. Brightness level display
The brightness level of the multi-func-
tion meter unit panel can be adjusted.
To adjust the brightness
1. Turn the key to "OFF".
2. Push and hold the "INFO" switch.
3. Turn the key to "ON" and continue
pushing the "INFO" switch until
the display switches to the bright-
ness control mode.
4. Push the "TRIP" switch to set the
brightness level.
3-11
5. Push the "INFO" switch to confirm
the selected brightness level and
exit the brightness control mode.
TIP
There are 4 brightness level settings.