Yamaha TRACER 700 2020 Owner's Manual page 25

The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" when using kilometers.
To switch the the fuel consumption
units, push the "TRIP" switch until the
measurement units change. When us-
ing miles, the fuel consumption unit is
"MPG".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 "MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der the current riding conditions is
shown.
To switch the instantaneous fuel con-
sumption settings, push and hold
"TRIP" switch until the display chang-
es.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
Instrument and control functions
Average fuel consumption
1
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption can be
set to either "AVE_ _._ km/L", "AVE_
_._ L/100 km" when using kilometers.
To switch the fuel consumption units,
when the display is steady, push the
"TRIP" switch until the measurement
units change. When using miles, the
fuel consumption is "AVE_ _._ MPG".
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel is shown.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km is shown.
3-10
 "AVE_ _._ MPG": The average dis-
tance that can be traveled on
1.0 Imp.gal of fuel is shown.
To reset the average fuel consumption,
select it and while the digits are flash-
ing push the "TRIP" switch until it is re-
set.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until
the vehicle has traveled 1 km (0.6 mi).
Coolant temperature
1
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
3