Yamaha TRACER 700 2020 Owner's Manual page 24

Instrument and control functions
serve tripmeter shows the distance
traveled since the last segment of the
fuel meter began flashing.
TIP
 The odometer will lock at 999999
3
and cannot be reset.
 The tripmeter will reset to 0 and
continue counting after 9999.9 is
reached.
Push the "TRIP" switch briefly to
switch the display in the following or-
der:
ODO → TRIP 1 → TRIP 2 → TRIP F →
km/L or L/100 km or MPG → AVE_ _._
km/L or AVE_ _._ L/100 km or AVE_ _._
MPG → _ _ °C → Air_ _ °C → ODO
TIP
 Push the "INFO" switch briefly to
switch the display in the reverse
order.
 The display changes to fuel re-
serve tripmeter "TRIP F" when the
last segment of the fuel meter
starts flashing.
 To reset a tripmeter, select it by
pushing the "TRIP" switch or the
"INFO" switch, and while the dig-
its are flashing, push the "INFO"
switch until it is reset.
 If you do not reset the fuel reserve
tripmeter manually, it will reset au-
tomatically and disappear from
the display after refueling and
traveling 5 km (3 mi).
Fuel reserve tripmeter
When the fuel level becomes low, the
last segment of the fuel meter will start
flashing. The fuel reserve tripmeter
"TRIP F" will automatically appear and
start counting the distance traveled
from that point. In this case, push the
"TRIP" switch to switch the display in
the following order:
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km → _ _
°C → Air_ _ °C → ODO → TRIP 1 →
TRIP 2 → TRIP F
3-9
For the UK:
TRIP F → MPG → AVE_ _._ MPG → _
_ °C → Air_ _ °C → ODO → TRIP 1 →
TRIP 2 → TRIP F
TIP
 Push the "INFO" switch to change
the display in the reverse order.
 You can manually reset the fuel re-
serve tripmeter, or after refueling
and traveling 5 km (3 mi) it will re-
set automatically and disappear
from the display.
Instantaneous fuel consumption
1
1. Instantaneous fuel consumption display
This function calculates the fuel con-
sumption under current riding condi-
tions.