Yamaha TRACER 700 2020 Owner's Manual page 19

Hide thumbs Also See for TRACER 700 2020:
Table of Contents

Advertisement

light remains on after adding oil,
stop the engine and have a Yamaha
dealer check the vehicle.
Coolant temperature warning
light "
"
This warning light comes on when the
engine is overheating. If this occurs,
stop the engine immediately and allow
the engine to cool. (See page 6-36.)
For vehicles with a radiator fan, the ra-
diator fan(s) automatically switch on or
off according to the coolant tempera-
ture.
TIP
When the vehicle is turned on, the light
will come on for a few seconds, and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Malfunction indicator light
(MIL) "
"
This light comes on or flashes if a prob-
lem is detected in the engine or other
EAU11449
vehicle control system. If this occurs,
have a Yamaha dealer check the on-
board diagnostic system. The electri-
cal circuit of the warning light can be
checked by vehicle power on. The light
should come on for a few seconds,
and then go off. If the light does not
come on initially when the vehicle pow-
er on, or if the light remains on, have a
Yamaha dealer check the vehicle.
NOTICE
If the MIL starts flashing, reduce en-
gine speed to prevent exhaust sys-
tem damage.
TIP
The engine is sensitively controlled for
ECA10022
the on-board diagnostic system to de-
tect deterioration and malfunction of
the emission control system. Due to
this specification, the MIL may come
on or flash for vehicle modifications,
lack of maintenance, or excessive or
Instrument and control functions
improper use of the motorcycle. To
EAU88330
prevent this, observe these precau-
tions.
 Do not attempt to modify the soft-
 Do not add any electrical acces-
 Do not use aftermarket accesso-
 Do not change drivetrain specifi-
ECA26820
 Do not remove or alter the O2 sen-
 Maintain proper drive chain.
 Maintain correct tire pressure.
 Maintain
 Do not operate the vehicle in an
3-4
ware of the engine control unit.
sories that interfere with engine
control.
ries or parts such as suspension,
spark plugs, injectors, exhaust
system, etc.
cations (chain, sprockets, wheels,
tires, etc.).
sor, air induction system, or ex-
haust parts (catalysts or EXUP,
etc.).
proper
brake
height to prevent rear brake from
dragging.
extreme manner. For example, re-
peated or excessive opening and
3
pedal

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtt690 2020Mtt690-u 2020

Table of Contents