Care And Maintenance - Aircare AURORA MINI Manual

Ultrasonic humidifier
Hide thumbs Also See for AURORA MINI:
Table of Contents

Advertisement

Available languages

Available languages

We recommend only adding a few drops of oil at a time and waiting a few minutes to see how it disperses,
instead of saturating the pad initially. You can add more oil if needed.
NOTE: Petroleum-based mentholated products are not recommended for use in the tray, as over time
this may deteriorate the strength of the tray. Instead use essential oils such as eucalyptus and mint to
create a similar fragrance.
NOTE: The aromatherapy feature only works when the humidifi er is operating.

CARE AND MAINTENANCE

Cleaning your humidifi er regularly helps eliminate odors and bacterial growth and helps maintain the per-
formance by reducing mineral build up on the oscillator.
Do not leave water in the water tank or base when unit is not in use for more than a day as mineral deposits
and bacterial growth may accumulate very quickly.
WARNING: To reduce the risk of fi re or shock hazard, always turn off and unplug unit before accomplish-
ing any cleaning or maintenance procedures.
CAUTION: Never immerse the base of this unit into water.
NOTE: Never use harsh cleaners or chemicals on this humidifi er. Do not use scouring agents on the outer
body, as this will scratch and mar the surface
DAILY MAINTENANCE
1)
Turn off unit and unplug from outlet. Take unit to sink area.
2) Lift off water tank and empty water from tank and base.
3) Rinse water tank cap under water faucet fl ow.
4) Wipe dry all parts with soft clean cloth or paper towels and reassemble.
WEEKLY MAINTENANCE
1)
Empty water from tank and base then fi ll water tank about half full with warm water and add two (2)
tablespoons of white vinegar.
2) Replace water tank cap tightly onto the water tank and swish solution vigorously around in the tank,
then let solution sit for 20 to 30 minutes.
3) Rinse the water tank very thoroughly with clean water. Do not leave Any cleaning residue in tank.
Wipe surfaces dry with soft cloth.
4) To clean the base, fi rst take a soft toothbrush or soft cloth and gently scrub the metal surface of the
oscillator. Do not scratch the oscillator with a hard object.
5) Make similar white vinegar/water solution as above and pour carefully into water basin portion of
base. Let solution sit for 20 to 30 minutes. Pour out solution. Rinse the water basin with fresh water
and wipe out thoroughly. Do not allow water or cleaning solution to get into control section.
6) Put a little vinegar/water solution on soft clean cloth and wipe down outer surface of unit.
7)
Dry outside surface body with soft absorbent cloth.
SUMMER STORAGE
1)
Clean unit as outlined in above. Dry out unit thoroughly.
2) Store in original package if available. Keep this manual with unit. Take care that nothing heavy is
placed on top of the box.
3) Do not store unit in an attic or other high-temperature area, as damage will occur.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Auv10awht

Table of Contents