Do you have a question about the Alliance H12 Series and is the answer not in the manual?
Questions and answers
eddie barth
February 16, 2025
sensorforpowercordaircareh12 600
1 comments:
Mr. Anderson
February 16, 2025
The sensor for the power cord of the Aircare Alliance H12 Series is a humidistat. It measures the humidity in the home and turns the fan off when the set humidity level is reached.
This answer is automatically generated
Ronald Bryant
January 22, 2025
how do i put water in the aircare vaporative humidifier
1 comments:
Mr. Anderson
February 10, 2025
To add water to the Aircare Alliance H12 Series evaporative humidifier:
1. Remove the water bottle from the unit. 2. Fill the bottle with water, ensuring not to overfill it. 3. Securely tighten the cap by hand, making sure it is properly threaded. 4. Place the bottle back into the cabinet with the front of the bottle facing forward and the cap facing down. 5. Allow the bottle to drain completely into the cabinet. 6. If needed, remove the bottle and refill it again. The unit holds up to 5.4 gallons of water when filled twice.
This answer is automatically generated
Sharon L Sorrell
July 7, 2025
Order a H12600 NO WATER CAP
Kim
February 18, 2025
What causes inside the bladder to turn gray and flaky?
Summary of Contents for Aircare Alliance H12 Series
Page 1
Everything you need to know about your ALLIANCE ALL H12 SERIES MODELS 1B73366 Read and save these instructions 8/2020...
Page 2
LET’S GET YOU UP AND RUNNING Remove the Alliance from its packaging. You should have: Cabinet H12400HB #4V5094020DKB | H12300HB #4V5094020LBR | H12600 #1B72939 Fan assembly #1B72344-R Bottle cover (attached to the fan assembly) #4V5096101BLK 1045 Super Wick® ALL 1045 WICKS Float #1B71675 Float rod...
Page 3
Lift off the fan assembly and remove The AIRCARE 1051 air filter can be used everything from the cabinet. Do with your Alliance for added air filtration. not discard the cardboard box under the While your 1045 Super Wick® is required for assembly.
Page 4
ABOUT THE CODES Note the raised lettering on your bottle that says FRONT and REAR. Put the – The F code means your unit is empty and needs to be FILLED with water. water bottle in the base with this lettering facing –...
FOIRE AUX QUESTIONS Où se trouve mon numéro de Votre numéro de série se trouve sur l’autocollant au dos de _ _ _ _ _ _ _ _ _ _ série? votre ventilateur. Vous pouvez l’écrire ici pour référence future : Pourquoi mon unité...
Page 6
IL EST TEMPS DE TE LANCER Enlevez Alliance de son emballage. Vous auriez dû : Armoire H12400HB #4V5094020DKB | H12300HB #4V5094020LBR | H12600 #1B72939 Assemblage de ventilateur #1B72344-R Couvercle de bouteille (fixé au bloc du ventilateur) #4V5096101BLK 1045 Super Wick® TOUTES MÈCHES 1045 Flotteur #1B71675...
Page 7
Soulevez l’ensemble du ventilateur et Le filtre à air AIRCARE 1051 (vendu séparément) retirez tout ce qui se trouve dans l’armoire. peut être utilisé avec votre Alliance pour une Ne jetez pas la boîte en carton sous l’ensemble. meilleure filtration de l’air. Alors que vos 1045 Super Wick®...
Page 8
AU SUJET DES CODES Notez les lettres en relief sur votre bouteille qui indiquent FRONT and REAR. – Le code F signifie que votre unité est vide et doit être REMPLIE d’eau. Placez la bouteille d’eau dans la base avec ce –...
PREGUNTAS FRECUENTES Su número de serie está en la etiqueta adhesiva de la parte ¿Dónde se encuentra mi número de serie? posterior del ensamblaje del ventilador. Puede escribirlo aquí _ _ _ _ _ _ _ _ _ _ para futuras consultas: •...
Page 10
PREPÁRESE PARA HACER FUNCIONAR EL APARATO Quite el Alliance de su embalaje. Debe encontrar los siguientes componentes: Gabinete H12400HB № 4V5094020DKB | H12300HB № 4V5094020LBR | H12600 № 1B72939 Ensamblaje del ventilador № 1B72344-R Cubierta de la botella (conectada al ensamblaje del ventilador) №...
Page 11
Levante el ensamblaje del ventilador para El filtro de aire AIRCARE 1051 (que se vende por quitarlo y retire todo del gabinete. No separado) se puede utilizar con su Alliance para una deseche la caja de cartón que se encuentra debajo filtración de aire adicional.
Page 12
ACERCA DE LOS CÓDIGOS Observe que las letras en relieve de la botella dicen FRONT (FRENTE) y REAR – el código F significa que su unidad está vacía y necesita ser RECARGADA de agua. (TRASERA). Coloque la botella de agua en la base –...
FREQUENTLY ASKED QUESTIONS Where is my serial number? Your serial number is on the sticker on the back of your fan _ _ _ _ _ _ _ _ _ _ assembly. You can write it here for future reference: Why isn’t my unit running? •...
Need help?
Do you have a question about the Alliance H12 Series and is the answer not in the manual?
Questions and answers
sensorforpowercordaircareh12 600
The sensor for the power cord of the Aircare Alliance H12 Series is a humidistat. It measures the humidity in the home and turns the fan off when the set humidity level is reached.
This answer is automatically generated
how do i put water in the aircare vaporative humidifier
To add water to the Aircare Alliance H12 Series evaporative humidifier:
1. Remove the water bottle from the unit.
2. Fill the bottle with water, ensuring not to overfill it.
3. Securely tighten the cap by hand, making sure it is properly threaded.
4. Place the bottle back into the cabinet with the front of the bottle facing forward and the cap facing down.
5. Allow the bottle to drain completely into the cabinet.
6. If needed, remove the bottle and refill it again. The unit holds up to 5.4 gallons of water when filled twice.
This answer is automatically generated
Order a H12600 NO WATER CAP
What causes inside the bladder to turn gray and flaky?
sensorforforpowercodemodelh12 600