Example: To display the filter cleaning alarm counter
PAD
1
Open the door and leave it open.
The oven lamp will turn on, and "0" will appear.
2
While pressing Start pad, press Number/Memory pad "5".
The cumulative total cooking time starts over and displayed after it is
cleared.
• 3 seconds later, "0" will appear.
J. OVEN LAMP
THE OVEN CAN NOT BE PROGRAMMED WHEN PROGRAM LOCk IS ACTIVATED! (See pages 13-14)
X
Oven Lamp settings when the door is open.
Example: To turn Oven Lamp settings OFF
PAD
1
Open the door and leave it open.
The oven lamp will turn on, and "0" will appear.
2
While pressing Start pad, press Number/Memory pad "9".
"PROG" will start to blink.
The previously set Oven Lamp settings are displayed.
3
Press Start pad.
"on"
4
Press Prog pad.
"PROG" will stop blinking, and the Oven Lamp settings will appear for
3 seconds.
Then "0" will appear.
To proceed to Step 5, press Start pad before "0" is displayed
after Step 4.
How to Operate
INSTRUCTION
INSTRUCTION
"oFF" "on" is repeated each time the pad is pressed.
- 18 -
DIGITAL DISPLAY WINDOW
e.g.
DIGITAL DISPLAY WINDOW