Panasonic NE-1252 Operating Instructions Manual page 19

X Oven Lamp blinks at the end of heating cycle.
Example: To turn the blinking Oven Lamp ON at the end of heating cycle
PAD
5
Within 3 seconds after pressing Prog pad at step 4, press Start pad.
"PROG" will start to blink.
The previously set Oven Lamp blink settings are displayed.
6
Press Start pad.
"oFF"
7
Press Prog pad.
"PROG" will stop blinking, and the Oven Lamp blink settings will appear
for 3 seconds.
Then "0" will appear.
To proceed to Step 8, press Start pad before "0" is displayed after Step 7.
Adjusting Oven Lamp brightness during cooking.
X
Example: To decrease brightness of the inner cavity during cooking
PAD
8
Within 3 seconds after pressing Prog pad at step 7, press Start pad.
"PROG" will start to blink.
The previously set Oven Lamp reduction settings are displayed.
9
Press Start pad.
"oFF"
10
Press Prog pad.
"PROG" will stop blinking, and the Oven Lamp reduction settings will
appear for 3 seconds.
Then "0" will appear.
How to Operate
INSTRUCTION
 "on"  "oFF" is repeated each time the pad is pressed.
INSTRUCTION
 "on"  "oFF" is repeated each time the pad is pressed.
- 19 -
DIGITAL DISPLAY WINDOW
DIGITAL DISPLAY WINDOW