Gearbox Programming - Launch X-PROG 3 User Manual

LAUNCH
• 3.2.2 Gearbox Programming
You can use gearbox programming function to restore the old gearbox data or
write in new data after a new gearbox is replaced.
• Connecting diagnostic system for gearbox programming
Note:
• The USB cable shown in below diagram is not included in the packing
list for now, using a USB cable could effectively enhance your data
transmission speed.
• Certain Vehicle gearboxes are connected based on the real chassis
type, for information how to connect the gearbox, refer to the onscreen
connection diagram.
• Operating on gearbox programming
Below procedure shows you how to perform gearbox programming for a BMW
using Launch diagnostic product, the procedure contains gearbox connection
and erasure of gearbox data.
14
X-PROG 3 User Manual