Operate The Somnobutler 2 Mobile - Weinmann SOMNObutler 2 stationary Description And Instructions For Use

6. Operate the SOMNObutler 2 mobile

26 Operate the SOMNObutler 2 mobile
For information on how to operate the individual
components of the polysomnography system, see the
instructions for use for the components in question.
Caution!
Risk of injury from storage system tilting or falling
down!
A tilting or falling storage system can injure people
and cause material damage.
– Place the storage system on a level surface.
– Hang the storage system from a hospital bed or a
standard hospital rail.
1. Open the clips on the protective bag.
2. Open the side opening of the protective bag.
3. Pass the power cord through the side opening and
connect it to the power supply. The power supply for
the USB/PC galvanic isolation module is only required if
you wish to charge the battery of the diagnosis device.
4. To create a link to the PC:
pass the Ethernet cable through the side opening and
connect it to the network socket.
5. Disconnect the diagnosis device from the charging/data
transfer cable at the start of measurement.