Connect Transferbox 2 - Weinmann SOMNObutler 2 stationary Description And Instructions For Use

3.5 Connect Transferbox 2

1. Connect the USB cable of the diagnosis device to the
USB/PC galvanic isolation module.
2. Pass the USB cable forwards through the opening in the
device platform above the Transferbox 2.
3. Connect the USB cable to the connection for the
diagnosis device of the Transferbox 2.
4. Stow the USB cable between the device platform and
the rear wall of the storage system.
5. Pass the Ethernet cable of the Transferbox 2 forwards
between the device platform and the rear wall.
6. Connect the Ethernet cable to the PC connection of the
Transferbox 2.
7. Connect the Ethernet cable of the Transferbox 2 to
your network socket.
8. Pass the power cord of the Transferbox 2 forwards
between the device platform and the rear wall.
9. Connect the power cord to the power supply
connection of the Transferbox 2.
10.Connect the power supply unit to the power supply.
Fit SOMNObutler 2 stationary 15