Table of Contents
Advertisement
Chapter 2
PRODUCT SPECIFICATIONS
2.1. Base Preamp System
2.1.1. Intended Use
The Preamp is used to amplify the return signal from an
ultrasonic transducer and improve the signal-to-noise
ratio for transmission over long cables. It is intended
for use with the Parent Products and their limits listed
in Section 2.2 (see "Parent Products" on page 5)
but can also be used as a standalone device in any
applicable Ultrasonic Testing scenario.
2.1.1.1 User
The Preamp is intended to be used by persons who have
read and understand this user manual as well as the user
manual of the relevant Parent Product's.
2.1.1.2 Operating Environment
The Preamp is for use in industrial environments having
ambient temperatures shown below. It is NOT intended
for use in explosive environments.
Category
Environment
Parameter
Minimum ambient
temperature
Maximum ambient
temperature
PAGE 3 of 24
Specification
-20°C (-4°F)
50°C (122°F)
CX0502 Rev 00.4
Advertisement
Table of Contents
